SPECIFICATIONS
10 FLASH/STROBE PATTERNS
OVER CURRENT PROTECTION
THERMAL PROTECTION
SHORT CIRCUIT PROTECTION
REVERSE WIRING PROTECTION
84 WATTS/6 AMP MAX POWER RATING, 12VDC
WORKS WITH LEDS ONLY
COMPACT SIZE: 4.2″ X 1.4″ X 0.6″
US PATENT 9,566,902 B1
5 YEAR WARRANTY
SOLD EACH
FITMENT
Plug and play installation on 2014-2019 Street Glide®, Street Glide® Special, Road Glide®, Road Glide® Special, Road King® Special applies brake flash/strobe patterns to Custom Dynamics® Rear 1157 LED bullet style run, brake, and turn signals. This unit is not compatible with Harley-Davidson® aftermarket dual intensity Tri-Bar.
Plug and play installation on 2014-2019 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra and 2016 Road Glide Ultra CVO™ and 2016-2019 Limited CVO™ applies brake flash/strobe patterns to rear center LED taillight (does not flash Tour-Pak). Unit also allows Fillerz® to flash/strobe when functioning as Run/Brake/Turn.
*Only Compatible with USA Model Harley-Davidson® Motorcycles.
*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.*
Additional Fitments also available.
USER FUNCTIONS
Pattern 0: Four Flashes then Solid
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat
Pattern 2: Seven Flashes then Solid
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
Pattern 7: Custom LED Blaster X Cycle, Repeat
Pattern 8: Max Strobe 4 Seconds, Solid
Pattern 9: Constant Fast Strobe Pattern
All Sound Systems
Reviews
There are no reviews yet.